How to check GPU temperature on Linux

Is your graphics card getting a bit hot while using Linux? Are you wondering what the temperature is, but are unable to check it? If so, follow along with this guide and learn how to check your GPU temperature on Linux!


Lm_Sensors is a command-line sensor detecting application that can detect various hardware sensors on a system and display the temperature in a readout. Usually, Lm_Sensors is used to identify CPU temperature and motherboard temperature, but the tool can also determine the temperature of a graphics card (in most cases).

Installing Lm_Sensors on Linux

Though the Lm_Sensors application is handy, it is not set up on any Linux operating system by default. So, before we go over how to use it to detect GPU temperatures, we must demonstrate how to install the program.

To start the installation, open up a terminal window by pressing Ctrl + Alt + T or Ctrl + Shift + T on the keyboard. Then, follow the command-line instructions outlined below that match your Linux operating system to get everything working.


To install the Lm_Sensors application on Ubuntu Linux, use the Apt command.

sudo apt install lm_sensors


On Debian, users can install the Lm_Sensor application by entering the Apt-get command below.

sudo apt-get install lm_sensors

Arch Linux

If you’re using Arch Linux, set up Lm_Sensors by entering the following Pacman command.

sudo pacman -S lm_sensors


On Fedora, you’ll be able to load up the Lm_Sensors application by entering the following Dnf command.

sudo dnf install lm_sensors


OpenSUSE Linux does not carry the Lm_Sensors application in their software repository. Instead, try to install the Fedora RPM package, or, install a different Linux distribution if you need to need to use this program.

Configure Lm_Sensors

After the Lm_Sensors application is installed on your Linux PC, it needs to be configured so that it can correctly check for temperatures on the system. To start the configuration process, run the sensors-detect command.

sudo sensors-detect

Once the sensors-detect command is run, you’ll see a message saying “Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe.” Type yes into the text box to continue.

Following the first question, you’ll be asked a series of questions for Lm_Sensors to be detected. Write yes for all answers with a bold “YES” and no for all “NO” answers.

Check temps with Lm_Sensors

To check your GPU’s temperature with Lm_Sensors, open up a terminal window, and write the command sensors in the prompt. A temperature readout will appear on-screen.

how to check gpu temperature on How to check GPU temperature on Linux

Your graphics card temperature is listed under “Adapter: PCI adapter.”


Reading Lm_Sensors is quite difficult if you’re new to Linux. If you’re trying to figure out the temperatures of your graphics card on Linux, you’ll be better off installing Psensor. It can show temperature readouts in an easy to understand graphical interface.


sudo apt install psensor


sudo apt-get install psensor

Arch Linux

sudo pacman -S psensor


sudo dnf install


Much like Lm_Sensors, there is no way to install Psensor on OpenSUSE through traditional software sources. Try installing the Fedora version, or switch to another Linux operating system that has Psensor available.

With the Psensor application installed on your Linux PC, open up the program on your system.

Inside of the Psensor application, you’ll see temperature readings for several different devices on your Linux PC. Look through the “Sensor” column for your graphics card to view its temperature.

how to check gpu temperature on linux 1 How to check GPU temperature on Linux

Want to track how hot your graphics card gets on Linux over time? Psensor can do it! Check the box in the “Graph” column next to your graphics card to enable tracking. Then, sit back and watch the graph in real-time!

Nvidia X Server Settings

Those that have a Nvidia graphics card and are using the proprietary Linux driver have an incredibly easy way to check GPU temperature, as the Nvidia X Server Settings app shows a real-time temperature readout.

Note: All Linux distributions that offer up the Nvidia proprietary driver also offer up the Nvidia X Server Settings application, so there is no need to go over how to install it. That said if your Linux OS does not have it installed, head over to to learn how to get it working on your system.

Checking the temperature of an Nvidia graphics card with the Nvidia X Server settings starts by launching the app. To do this, press Alt + F2 to open up the quick launcher. Then, write in nvidia-settings and press Enter to launch it.

how to check gpu temperature on linux 2 How to check GPU temperature on Linux

Once the Nvidia X Server Settings app is open, click “Thermal settings” on the side-bar. In this area, you will be able to see a real-time readout of your Nvidia GPU’s temperature.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

The reCAPTCHA verification period has expired. Please reload the page.